Blynk, PlatformIO and ESP32
Blynk is an IoT-platform that consists of a Blynk server, custom projects within an iOS/Android mobile app and custom hardware IoT-nodes (Arduinos etc) using a Blynk library. The mobile app…
Category: C++
Radio chirp data incorporated in an MQTT environment
Internet-of-things does not require that every device has to be directly connected to the Internet. The complexity and possible security issues with every sensor having its own IP address would in…
A self-hosted MQTT environment for Internet of Things – Part 2
In the second post in this series, I will setup two ESP8266 microcontrollers with MQTT publishing through a Raspberry Pi-hosted Mosquitto broker. The idea is that the microcontrollers will send…
Exploring Adafruit IO
Adafruit hosts a cloud service, io.adafruit.com, where you can upload data from your devices and also subscribe to data from other devices. The service is currently in beta, but you…
Meet the Huzzah!
ESP8266 is a very popular and inexpensive WiFi-chip that can be a real contributor for taking small gadgets to the Internet. This post describes my first experiments with an Adafruit…
A Lego robot car with Arduino and servo motors
With an Arduino and some servos lying around, I find it hard not to try out something robot-like. An obstacle-avoiding mini car is probably one of the easiest projects to…
Arduino to Raspberry wireless communication – some improvements
In my previous post, I experimented with sending measurements values from an Arduino UNO to a Raspberry Pi via a 433 MHz radio protocol. After testing the setup for a…
Major Tom to Ground Control – simple radio communication between Arduino and Raspberry
The Arduino computers are excellent for reading sensor data, and they are so inexpensive and consume very little power that you can use plenty of them in your home without…
