RFXtrx433E, Node-RED, MQTT and Home Assistant
This post describes how I have setup an RFXtrx433E device with a Raspberry Pi to transform data from inexpensive 433 MHz motion- and climate-sensors into MQTT messages on my local…
Tag: MQTT
Owntracks, Mosquitto and Home Assistant
OwnTracks is an open-source device tracker app for iOS and Android that lets you publish location data from your mobile phone. On the mobile app you can locate other connected…
InfluxDB and Grafana for sensor time series
I’ve started using InfluxDB for storing my sensor data as time series. The main reason for this is that it allows me to use Grafana for analyzing the data. This…
Home Assistant – getting started and using MQTT sensors
I’ve been searching for an easy-to-get-started home automation platform that can be extended and customized as my needs grow. After struggling with OpenHAB, Domoticz and Freedomotic, I’ve found Home Assistant…
Monitoring CPU temperatures on a Raspberry Pi with MQTT
Recently I’ve had problems with my Raspberry Pi 3 overheating though I use a heat sink for the processor and have a very modest load on the machine. When the RPi…
A sensor monitor with OLED in MicroPython
I have different sensor nodes at home that publish measurements at regular intervals to a Raspberry Pi. The data is stored on the RPi and in a cloud service and can…
Radio chirp data incorporated in an MQTT environment
Internet-of-things does not require that every device has to be directly connected to the Internet. The complexity and possible security issues with every sensor having its own IP address would in…
A low energy open door detector with radio signals and MQTT
This blog post describes how I have set up a door-open detector at home. It uses a small ATtiny85 board that broadcasts a 433 MHz signal every time the door…
Thingsmatic 